SPCD Galvanized Steel Sheet

Product Description

SPCD is a Japanese standard for cold-rolled steel, specifically designed for deep drawing applications. It is characterized by its excellent formability and surface quality, making it ideal for producing complex shapes without cracking or breaking. When galvanized, SPCD steel plates are coated with a layer of zinc to provide enhanced corrosion resistance, extending the material’s lifespan in harsh environmental conditions. The combination of SPCD’s low carbon content, good weldability, and zinc coating makes it suitable for a wide range of applications, including automotive parts, appliances, and roofing. This galvanized steel offers durability, protection against rust, and the ability to withstand mechanical stress, making it a popular choice in industries that require both strength and ease of fabrication.

SPCD Galvanized Steel Sheet Standard Specification

Thickness	0.12~2.5mm
Width	1000mm, 1219mm, 1500mm, 1800mm, 2000mm, 2500mm, 3000mm, 3500mm, etc
Length	1000-6000 or Since the custom
Surface	Normal (uneven) spangle/ Skinpassed spangle/ Regular spangle / Minimized spangles
Form	Coils, Foils, Rolls, Plain coil, Shim coil, Perforated coil, Chequered coil, Strip, Flats, Blank (Circle), Ring (Flange) etc.

SPCD Galvanized Steel Sheet Equivalent Material

Grade	Euronorm	China GB	Japanese JIS	US ASTM	German
Grade	EN10130-2006	GB/T 5213-2008	JISG3141-2005	ASTMA1008-2005	Q/SGZGS 324.3-2011
SPCD	DC03	DC03	SPCD	CS TypeA TypeB	St13

SPCD Galvanized Steel Sheet Metal Content

Grade	Element	C	Mn	P	S
SPCD	Min.	-	-	-	-
SPCD	Max.	0.12	0.5	0.04	0.04

Tensile strength: ≥270 MPa
Yield strength: ≤240 MPa
Elongation: 30-40%

Delong Warehouse

Product Inspection

The appearance of the coating is bright, meticulous, without sagging or wrinkles. Thickness inspection can use coating thickness gauge, the method is relatively simple. The thickness of the coating can also be obtained by converting the amount of zinc adhesion. For the bonding strength, a bending press can be used to bend the sample at 90-180°, and there should be no cracks or peeling of the coating. A heavy hammer can also be used to test, and the salt spray test and copper sulfate corrosion test can be done in batches.