SPCC Galvanized Steel Sheet

Product Description

SPCC is a Japanese standard grade for cold-rolled carbon steel, often used as a base material for galvanized steel plates. The “SPCC” designation stands for “Steel Plate Cold Commercial,” indicating its suitability for general-purpose applications that do not require high tensile strength. When galvanized, SPCC steel plates undergo a coating process where zinc is applied to enhance corrosion resistance and extend their lifespan, making them ideal for use in environments prone to rusting. These galvanized SPCC steel plates are commonly used in manufacturing appliances, automotive parts, roofing, and other industries requiring a combination of good formability, weldability, and corrosion resistance. Their cost-effectiveness, along with durability, makes SPCC galvanized steel a popular choice for a wide range of applications.

SPCC Galvanized Steel Sheet Standard Specification

Thickness	0.12~2.5mm
Width	1000mm, 1219mm, 1500mm, 1800mm, 2000mm, 2500mm, 3000mm, 3500mm, etc
Length	1000-6000 or Since the custom
Surface	Normal (uneven) spangle/ Skinpassed spangle/ Regular spangle / Minimized spangles
Form	Coils, Foils, Rolls, Plain coil, Shim coil, Perforated coil, Chequered coil, Strip, Flats, Blank (Circle), Ring (Flange) etc.

SPCC Galvanized Steel Sheet Equivalent Material

Grade	Euronorm	China GB	Japanese JIS	US ASTM	German
Grade	EN10130-2006	GBT 2518-2008	JIS:G3302-2005	ASTM A653M	Q/SGZGS 324.3-2011
SPCC	DC01	DC01	SPCC	CS TypeC	St12

SPCC Galvanized Steel Sheet Metal Content

Grade	Element	C	Mn	P	S
SPCC	Min.	-	-	-	-
SPCC	Max.	0.15	0.6	0.1	0.05

Tensile strength: ≥270 MPa
Yield strength: 120~280 MPa
Elongation: 28-38%

Delong Warehouse

Product Inspection

The appearance of the coating is bright, meticulous, without sagging or wrinkles. Thickness inspection can use coating thickness gauge, the method is relatively simple. The thickness of the coating can also be obtained by converting the amount of zinc adhesion. For the bonding strength, a bending press can be used to bend the sample at 90-180°, and there should be no cracks or peeling of the coating. A heavy hammer can also be used to test, and the salt spray test and copper sulfate corrosion test can be done in batches.